 |
 |
 |
 |
The electric smoker is made from 100% 18 gauge,
304 stainless steel and is designed for ease of use and portability
Every Smokin-It Model #4D-WiFi GEN2 smoker comes with:
- Integrated Digital-WiFi GEN2 controller with dual enhanced water resistant probes. 2nd generation WiFi PID digital controller with a newly designed WiFi chip. Provides much improved compatibility with Mesh type routers along with NEW push notification features.
- LCD screen with UV protection
- Compatible with a smart phone/tablet
- Smoker has a temperature range of 0-325 degrees F and can hold +/-3 degrees from set point
- Fixed mounted air temperature probe located inside smoker, with added stainless steel guard for protection
- Four locking heavy duty 5" diameter casters (need to be attached)
- Six stainless steel grilling racks with room for 11 racks, rack size is18-1/2 " x 21-1/2", racks are 21/4" apart
- Smoke box and drip pan that
slides under smoker
- Triple latch door system
- Smoker is predrilled on left side for the Bella cold smoke generator
- Sample of hickory wood to season smoker
- Smoker Model #4D-WiFi GEN 2 has the capacity to hold 75 pounds of meat or
seafood (estimate)
- 1500-watt heating element with LED indicator light, 12.5 amps
120-volt single phase
- Insulated with fiberglass to reduce heat loss
- 12-foot
power cord
- Inside dimensions are 18-5/8" W x 22" D x 35" Hl, rack size is 18-1/2 " x 21-1/2"
- Outside dimensions are 21" W x 28" D x 39-7/8" H (plus 5" for casters and 2-3/8" for digital controller)
- Three year warranty on parts and workmanship
- One year warranty on digital controller
- Integrated electric power cord hangers to mount on the back panel of the smoker, hangers made from stainless steel with pre-drilled holes and screws provided for installation
- Suitable for indoor commercial use, smoker will require outside ventilation at a maximum of 70 CFM recommended
- NSF certified (Mfg. by HWC Company Exclusively for Smokin-It, LLC - ALL Model Smokers #1-5)
- Free shipping in lower 48 - USA (Free shipping does NOT include a lift gate if needed) Shipping VIA FedEx LTL Freight ONLY
We recommend purchasing a cover when you buy your new smoker as it will protect your smoker and digital controller while stored outside(see cover photo in the alternative views of this model)
Please Note: We recommend signing up for an account when placing your order (not guest check out) so you can receive your shipping updates from our website regarding your order
PLEASE NOTE: it is recommended to take photos of what you are doing when working on your smoker Check our website for additional accessories for your smoker
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 1500 watt heating element.
PID digital temperature controller Meat probe included Free shipping in lower 48 - USA
|
|
 |
 |
 |
 |
|
 |

|