Home > Smokers >

Smoker Model #3.5DW-Digital WiFi
<b>Smoker Model #3.5DW-Digital WiFi</b>

Alternative Views:

Our Price: $2,049.99

Availability: Usually Ships in 3 to 5 Business Days
Product Code: SMKMDL3.5D-WIFI-GEN2


The electric smoker is made from 100% 18 gauge, 201 stainless steel and is designed for ease of use and portability

Every "SMOKIN-IT" Model #3.5D-WiFi GEN2 smoker comes with:

  • Integrated PID-WiFi Digital Controller with dual enhanced water resistant probes. 2nd Generation WiFi PID digital controller with a newly designed WiFi chip. Provides much improved compatibility with MESH type routers along with NEW push notification features.
  • Compatible with a smart phone/tablet
  • Smoker has a temperature range of 0-325 degrees F and can hold +/-3 degrees from set point
  • Six stainless steel grilling racks, room for ten, rack size is 14-1/2" x 21-1/2", racks are 2-1/4" apart
  • Smoke box with added support and a "NEW" stainless steel 2-1/2" deep by 13-3/4" x 19-1/2" drip pan that slides under smoker
  • Four locking heavy duty 5" diameter casters (needed to be attached)
  • Fixed mounted air temperature probe located inside smoker with added stainless steel guard for protection
  • Triple latch door system
  • Smoker is predrilled on left side for the Bella cold smoke generator
  • Sample of hickory wood to season your new smoker
  • Smoker model #3.5D-WiFi GEN2 has the capacity to hold 60 pounds of meat or seafood (estimate)
  • A 1300-watt heating element with LED indicator light, 11 amps 120-volt single phase
  • Insulated with fiberglass to reduce heat loss
  • 12 foot power cord
  • Inside dimensions are 15" W x 22" D x 28" H
  • Outside dimensions are 17" W x 28" D x 33"H (plus 5" for casters and 2-3/8" for digital controller)
  • Three year warranty on parts and workmanship
  • One year warranty on digital controller
  • Integrated cord hangers to mount on the back panel of the smoker made from stainless steel with pre-drilled holes and screws provided for installation
  • Suitable for indoor commercial use, smoker will require outside ventilation at a maximum of 70 CFM recommended
  • NSF certified (Mfg. by HWC Company Exclusively for Smokin-It, LLC - ALL Model Smokers #1-5)
  • Free shipping in lower 48 - USA (Free shipping DOES NOT include a lift gate if needed) Shipping VIA FedEx LTL Freight ONLY
NOTE: Model #3.5D cannot be placed on a cart/cabinet, as it will become top heavy

We recommend purchasing a cover when you buy your new smoker as it will protect your smoker and digital controller while stored outside (see cover photo in the alternative views of this model)
We recommend signing up for an account when placing your order (not guest check out) so you can receive your shipping updates from our website regarding your order

PLEASE NOTE: it is recommended to take photos of what you are doing when working on your smoker
Check our website for additional accessories for your smoker

  • State of the art integrated PID digital temperature controller with meat probe
    Temperature range of 0 to 325 degrees F, can hold +/- 3 degrees from set point
    NSF Certified

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
5 of 5 Sweet February 28, 2021
Reviewer: Lechef from Tigard, OR United States  
Got this in April. I've smoked about 20 briskets, 20 butts, 40 racks, 10 salmon (hot), jackfruit, tomatoes, beets, eggplants, and more. I dig it. The welds on a few tines of the racks failed, but that's no biggie. It's well made and reliable. Wifi and probe thermometers and all the controls are pretty awesome. Saves hella money on wood and work and space vs stick burners. The product is as good as any.

Was this review helpful to you?

Browse for more products in the same category as this item:

Smokers > WIFI & Pro Series Smokers